Dross Separator for Recover Liquid Aluminium from the Hot Aluminum Dross

Product Detail

LY-MOVEABLE DROSS SEPARATING MACHINE

1. SUMMARIZE

The Aluminum Moveable Dross Machine is based on solid objects and the physical properties of liquid phase object is different, the proportion of different and separate Of hot ash contains a certain proportion of metal aluminum, join in the separator, classics agitate the inclusion of metal aluminum gradually sink to the bottom of the container form molten pool, grey stayed in molten pool, under the action of mixing, liquid aluminum from feeding hole at the bottom of the container, the ash in the upper container.

The working process:
Out of the hot aluminum ash slag into the rub the ash pot, open positive &negative fully mixing machine, sink into the bottom of the pot after the separation of liquid aluminum, collected from the bottom hole flow naturally aluminum water wheel, stay without aluminum the water out, slowly open the bottom of the pot aluminum ash to the ash discharge from the car.

Main Feature:

1?Mechanical Stirring, Stirring fully,Improve working efficiency;

2?Separating effect is good, Improve aluminum recycling rate;

3?Easy operation, maintenance convenience;

4?No need fuel,using residual heat from the hot dross,to lower down treatment cost;

2.Technical parameters

Items	Description	Unit	Technical parameters
1	Overall dimensions	mm	1300*1300*1500,Aluminum recovery rate=80%,Single-pass treatment time=15min/batch,processing dross temperature=700?,processing capacity200-250kg
2	Voltage	V	380
3	Gear Motor		3KW 1400r/min,Gear Ratio 30
4	Stirring Paddle rotate speed	r/min	30-35
5	Hear-resisting pot	mm	Wear-resisting casting steel,QT500,thickness 20
6	Stirring Paddle	mm	Wear-resisting casting steel,QT500,thickness 20
7	Main shaft size	mm	60
8	Main Shaft supporting plate	mm	Thickness 20,Q235
9	Shell	mm	Thickness 6,Q235
10	Aluminum dross bucket,Liquid aluminum dross	mm	Thickness 6,Q235